Compaq Heat Shrinkable Indoor/Outdoor Terminations are designed for 1 Core Copper/Aluminium Tape/Wire Shield and Lead Sheathed XLPE Insulated Cables Up to 72.5kV. The design has been focused to provide the basic important functions required for high voltage power cable accessories including the electric performance, stress relief measure, environmental seal, mechanical fatigues and other related performance parameters laid down in different countries for various service conditions.
Compaq Heat shrink terminations are suitable for indoor (switchgear, cable box, transformer, motor type) and outdoor (pole mounted) terminating of 3 core cable. They are also suitable for 1 Core Copper/Aluminium Tape/Wire Shield and Lead Sheathed XLPE Insulated Cables Up to 72.5kV.
- High tensile strength
- Longer service life
- Resistance against corrosion
- Suitable for Mechanical shear head Lugs & Compression Lugs.
Specifications and Standards
Meets the requirement of IS:13573 (2011), IEC 60502, IEEE 48, 404, CENELEC HD 629-1 & other applicable international quality
|Text Requirment ||Requirement Test Value ||GPO/I-3336 Series |
|AC Dry Withstand Voltage ||75 kV/1 minute ||Pass |
|D.C. Voltage Withstand Test ||144 kV/30 minutes ||Pass |
|Lightening Impulse withstand Voltage ||170 kV || 170 kV |
|Humidity (Indoor) ||300 hr at 1.25 U0 ( 24 kV rms ) ||Withstood |
|Salt Fog (Outdoor) ||1000 hr at 1.25 U0 ( 24 kV rms ) ||Withstood |